Get to know your Espro's before you've even held one. Here is "The Espro How To..." guide!

1.The Espro Electronic Cigarette

Espro Electronic Cigarettes are easy to use:

Step 1: Unpack the cigarette, charger box & plug.
Step 2: Screw a battery into the charger box & charge your first battery for up to 18 hours, even if the green light on the charger has already indicated that it is fully charged. Repeat this with your second battery. The next time the batteries need charging for just 4-6 hours.
Step 3: Remove the blank cartridge from the atomiser then screw & connect the atomiser to the battery.
Step 4:Take out a new cartridge and remove the white stop cap, push the cartridge firmly onto the atomiser, your Espro is now ready to use.
Step 5:For best vapour results please inhale slowly.

image for demonstration only

You are now ready to enjoy!

When you inhale it, the electronic circuit works automatically; the LED lights up at the end, simulating cigarette smoking. When you stop inhaling, the electronic circuit stops automatically & the LED light and the vapour also stop. If the LED light becomes darker or flashes, it is the time for you to recharge the battery. If your battery is fully charged and you have no vapour it is time to change your cartridge.

Advice & Precautions about your Espro Cigarette.

1. Keep the cartridge & the E-Liquid out of reach from children & pets.
2. Do not use excess drops of the smoking E-Liquid in the cartridge & DO NOT place any E-Liquid directly onto the Atomiser.
3. Please keep the cartridges & the E-Liquid in a cool and dark place.
4. If you do not use the Espro for a long time, please take out the cartridge.
5. Once a cartridge is open, it will need to be used within two weeks.
6. Espro Smoking Products are for adults who are smoking or are trying to quit smoking, not for persons under 18 years old or under the legal smoking age in your country.
7. Not for pregnant or breast-feeding women, people with Heart conditions or people who have health conditions.
8. If you are unsure please consult your Doctor.

Remember, any questions you have please contact us.

2. The Espro Electronic Cigar

Espro Electronic Cigars are easy to use:

Step 1: Unscrew and detach the indicator light cap
Step 2: Insert the battery into the tube with the negative pole first
Step 3: Screw back the indicator light cap
Step 4: Unwrap the cartridge box, take out the cartridge
Step 5: Screw the cartridge into the tube.

image for demonstration only

image for demonstration only

You are now ready to enjoy!

When you inhale, the electronic circuit works automatically; the LED light turns red, simulating cigar smoking. When you stop inhaling, the electronic circuit stops automatically; the LED light and the smoke also stop. If the red light of the head becomes darker, it is the time for you to recharge the battery. If your battery is fully charged and you have no vapour it is time to change your cartridge.

image for demonstration only

When you charge the battery, beware the positive and negative poles at the correct directions. The charger works with the normal voltage at 100-240V, 50/60Hz. After you have used for around 20 to 30 days, and you notice that the vapour (smoke) reduces with the new cartridge and full charged battery, you need to reset to the normal working condition. Unscrew, detach and take out the cartridge first, you can use a pin or paper clip; slightly insert into the reset hole at the top and hold for approx. 10 seconds, repeat if necessary and then it is reset for normal working condition. Please do not reset frequently. Keep the reset hole away from water.

Please note that the LED light for Electronic Cigar is an imitation of a lit Cigar, it is not actually lit.

3. The Espro Electronic Pipe

Espro Electronic Pipes are easy to use:

Step 1: To take off the pipe lid at the top of the pipe unscrew it in anti-clockwise direction, it will then detach.
Step 2: Insert the battery into the battery compartment with the negative pole first.
Step 3: When the battery has been inserted you can then screw the Pipe lid back on, do not over tighten.
Step 4:Unwrap the cartridge, pull out the inhaler, and insert it into E-Pipe.

Warning: Do not use any metal part to take off the Pipe lid.

image for demonstration only

You are now ready to enjoy!

When you inhale, the electronic circuit works automatically; the LED light turns red, simulating Pipe smoking. When you stop inhaling, the electronic circuit stops automatically; the LED light and the smoke also stop.

image for demonstration only

image for demonstration only

When you charge the battery, beware the positive and negative poles at the correct directions. The charger works with the normal voltage at 100-240V, 50/60Hz. After you have used for around 20 to 30 days, and you notice that the vapour (smoke) reduces with the new cartridge and full charged battery, you need to reset to the normal working condition. Unscrew, detach and take out the cartridge first, you can use a pin or paper clip; slightly insert into the reset hole at the top and hold for approx. 10 seconds, repeat if necessary and then it is reset for normal working condition. Please do not reset frequently. Keep the reset hole away from water.

Espro Precautions

1. Keep the cartridge or the liquid out of reach of children.
2. Do not use excess drops of the smoking liquid at one time.
3. Please keep the cartridge or the liquid in a cool and dark place.
4. If you do not use the Espro for a long time, please take out the cartridge.
5. Once a cartridge is open, it will need to be used within two weeks.
6. Espro Smoking Products are for adults who are smoking or are trying to quit smoking, not for persons under 18 years old or under the legal smoking age in your country.
7. Not for pregnant or breast-feeding women, people with Heart conditions or other people who have health conditions.
8. If you are unsure please consult your Doctor.

Remember, any questions just ask!